Do-it-yourself Acrylic Frames | How to Make & Dangle Your 3D Artwork
Looking for a way to jazz up your wall artwork? Check out creating your own Diy acrylic frames for personalised 3D artwork. This publish will walk you via accurately how I designed these in my residence.
If you are seeking for a custom made way to body your photographs or artwork to make it stand out from the wall, these Do it yourself acrylic frames are the ideal factor.
I landed on these frames because I wanted a minor anything to incorporate a tiny more pizzazz to my bathroom wall. 
We decided to include my spouse&rsquos like of golf into the blend by printing pictures he took of PGA golfing programs he&rsquos played in black and white.
I really like when art is a discussion piece, so this was the ideal addition to the rest room wall.
To make it definitely stand out, I built these Diy acrylic frames for every single of the pics.
Right here are the measures I took&hellip 
Desk OF CONTENTS
- 1. Collect your resources.
- 2. Tape just about every aspect of every corner.
- 3. Mark where you want to drill your holes.
- four. Drill website link .
- 5. Use your glue dots to secure your photographs to the frame.
- six. Mark the whole on the wall exactly where you plan to dangle it.
- seven. Use your punch software to mark the total on the wall.
- 8. Drill your holes in the wall.
- 9. Screw the standoffs into the wall.
- ten. Attach your body to the standoffs.
- 11. Revel in the concluded product or service!
Disclaimer: This put up does involve affiliate back links for your usefulness. This is at NO more price tag to you but earns me a tiny fee. To go through far more, examine out our disclosure policy.
1. Gather YOUR Supplies.
Initially factors to start with, gather all your products. All resources for every thing I used are joined beneath. I also provided a listing with hyperlinks of what we used to hang the frames, also. 
FOR Building THE Do it yourself ACRYLIC FRAMES:
- Plexiglass/Acrylic Sheets
- Standoffs
- Glue Dots
- Piece of Lined Paper
- Drill 
- Drill Bits (a single for the size of the opening of your standoffs and 1 for the screw for the wall)
- Painter&rsquos Tape
- Ruler
- Marking Resource (I used a Sharpie)
FOR HANGING THE Do-it-yourself ACRYLIC FRAMES:
- Pencil
- Handheld Stage
- Punch
- Screwdriver
two. TAPE Just about every Facet OF Every CORNER.
Plexiglass/acrylic is quite delicate.
Since of this, you have to be really thorough when you are drilling the holes.
Positioning a piece of painter&rsquos tape on possibly side the place you approach to drill your hole will aid continue to keep the acrylic sheet from breaking or cracking when you drill.
I also kept the protective address on each side of the piece, much too.
3. MARK Where by YOU WANT TO DRILL YOUR HOLES.
As soon as you have positioned the painter&rsquos tape on all four sides (or nevertheless a lot of sites you plan to drill a gap), you can place a mark of where by you want to drill your hole.
I drilled my holes 1&Key in from just about every edge as you can see from the image previously mentioned.
four. DRILL YOUR HOLES.
In advance of essentially drilling, double and triple examine that your marks are stage both horizontally and vertically.
You&rsquoll want to have these degree for when you hold them. 
The drill little bit you pick really should be massive enough to let the standoff to fit inside of the gap.
I would do a examination operate on a piece of scrap materials to make sure it is significant ample. 
At the time you are selected that the marking are amount and the little bit is significant ample, you want to start drilling.
Below is a fantastic online video to observe if you would like a demonstration on how to drill by acrylic.
You want to use about half power when you are drilling.
Sluggish and continual. If you go to rapid, the acrylic will crack, so get your time.
As you drill you should really see spirals of the acrylic little by little getting eliminated. 
Repeat the drilling for each and every gap you require.
five. USE YOUR GLUE DOTS TO Safe YOUR Pictures TO THE Body.
As soon as your holes are designed, you can add your image to the piece of acrylic/body.
The important below is to yet again, make certain your picture is degree before you fully secure it to the body.
The glue dots are really sticky and don&rsquot enable for a great deal of wiggle home, so it may perhaps be a excellent strategy to line up a piece of lined paper guiding the body to enable you line the edges of your photo.
No matter what trick functions for you to make sure the picture will get glued to the body stage will do. 
six. MARK THE Whole ON THE WALL The place YOU Approach TO Cling IT.
As you start out to dangle, mark your holes on the wall, but make guaranteed your frame is stage.
If you measured the right way in the action just before drilling, the holes on your body should now be degree.
If you are hanging much more than just one body like I did, make sure every single frame is level in your grid, far too. 
seven. USE YOUR PUNCH Instrument TO MARK THE Total ON THE WALL.
I love this tool so a lot mainly because it will get your hole started and lets your drill to remain in place when you begin drilling.
If you don&rsquot have 1, I extremely recommend it!
8. DRILL YOUR HOLES IN THE WALL.
Be confident to use a little bit that suits the screws that came along with your standoffs.
This will most probably be a smaller sized bit than the 1 you made use of on the frames.
I also utilized a stud finder to see if I necessary drywall anchors, but because these frames are not that significant, you could likely do devoid of them.
9. SCREW THE STANDOFFS INTO THE WALL.
At the time you order your standoffs, you&rsquoll see how they do the job.
In purchase for the photograph to &ldquostand off&rdquo the wall, you have to protected the standoff with the offered screw right before attaching the image to the standoffs.
As you can see from the photo, generating sure every thing is level and calculated appropriately is super significant. 
10. Attach YOUR Body TO THE STANDOFFS.
The moment you&rsquove attached the standoffs, it&rsquos time to attach the shots!
Line up the standoffs with your drilled holes and protected the standoffs.
If all goes well, anything will line up correctly and be completely ready to go!
If you are like my father and I, you&rsquoll come across at the very least 1 that doesn&rsquot line up beautifully.
For this, we cheated a small little bit and secured the standoff to the body and utilized a glue dot to protected it to the wall, so it didn&rsquot transfer.
We only had to do this for two corners of two frames, but don&rsquot fear if you mess up a person&hellip We&rsquove been there! 
eleven. REVEL IN THE Concluded Products!
Now it&rsquos time to take pleasure in your get the job done!
We did a grid of 9 total pics which was a big enterprise with all the measuring, but I&rsquom in appreciate with how it turned out.
Allow me know in the remarks what you think of the concluded solution!